Universal Uniblast F111-005 Blast Cabinet Door Gasket – 1/2" x 1" x 50' – Pre-1999

Maintain a proper seal around the door of your older Universal / Uniblast blast cabinet with the F111-005 Open-Cell Door Gasket.

This gasket measures 1/2" thick x 1" wide and is supplied in a 50-foot roll. It is specifically identified for pre-1999 Universal Equipment Manufacturing / Uniblast Technologies blast cabinets.

Part Information:

• Manufacturer: Universal Equipment Manufacturing Company / Uniblast Technologies
• Part Number: F111-005
• Product: Blast Cabinet Door Gasket
• Material: Open-Cell Gasket Material
• Size: 1/2" Thick x 1" Wide
• Roll Length: 50 Feet
• Application: Blast Cabinet Door Seal
• Equipment Vintage: Pre-1999

Includes:

• (1) 50-Foot Roll of 1/2" x 1" Open-Cell Door Gasket
• Exploded Diagram Item #11

Features:

• Genuine Universal / Uniblast blast cabinet component
• 1/2" thick x 1" wide
• Open-cell construction
• Supplied in a 50-foot roll
• Designed for pre-1999 Universal / Uniblast blast cabinets
• Provides a compressible seal around the cabinet door
• Helps contain abrasive media and dust during blasting
• Ideal for routine cabinet maintenance and refurbishment
• Helps keep older Universal / Uniblast equipment in service

What the Door Gasket Does

The F111-005 gasket provides the compressible seal between the blast cabinet door and cabinet enclosure.

When the door closes, the gasket compresses to conform to the mating surfaces and helps close small gaps around the door opening. This helps keep abrasive media and dust contained within the cabinet during operation.

Over years of use, the original gasket can become flattened, hardened, torn, or damaged and may no longer provide an effective seal.

Common Signs the Door Gasket Needs Replacement:

• Dust escaping around the cabinet door
• Abrasive media leaking from the door opening
• Gasket remains permanently flattened
• Torn or missing sections
• Material has hardened or deteriorated with age
• Door no longer seals evenly
• Existing gasket is pulling away from the cabinet
• Cabinet is being restored or refurbished

Important – Pre-1999 Application

F111-005

• Pre-1999 equipment
• 1/2" thick x 1" wide
• Open-cell
• 50-foot roll
• Diagram Item #11

F111-025

• Post-1999 equipment
• 3/4" x 3/4"
• Closed-cell
• 25-foot roll
• Diagram Item #10

50-Foot Roll

The 50-foot roll provides material for servicing the blast cabinet door and leaves additional gasket available for future maintenance or additional equipment.

Before removing the original gasket, note its routing and installation around the door. Remove deteriorated gasket material and residue so the new gasket can sit evenly against the mounting surface.

Inspect the Complete Door Seal

When replacing the F111-005 gasket, inspect the complete door opening for:

• Old gasket or adhesive residue
• Bent or damaged sealing surfaces
• Loose door hardware
• Uneven door alignment
• Areas where abrasive has accumulated around the seal
• Damage that could prevent even gasket compression

A new gasket can only seal properly when the door and mating surfaces are in good condition.

Finding Parts for Older Universal / Uniblast Equipment

Universal Equipment Manufacturing and Uniblast Technologies blast cabinets have been used in industrial applications for many years. Components can vary depending on the age of the machine, making the original part number and equipment vintage especially important.

For this product, the key identification information is:

Universal / Uniblast F111-005 – 1/2" x 1" Open-Cell Door Gasket – 50' Roll – Pre-1999 – Diagram Item #11

Important:

This listing is for one 50-foot roll of Universal Equipment Manufacturing / Uniblast Technologies F111-005 1/2" x 1" Open-Cell Door Gasket for pre-1999 equipment, identified as Item #11 in the exploded parts diagram.

This is the PRE-1999 open-cell door gasket. Post-1999 equipment uses a different door gasket configuration; verify the existing gasket and equipment vintage before ordering.

Doors, hardware, window components, and other parts shown in the exploded diagram are sold separately unless specifically stated otherwise.

Completely shut down abrasive blasting equipment before performing cabinet maintenance. Replace damaged or deteriorated sealing components before returning the cabinet to service.

Need another part for your Universal or Uniblast blast cabinet? Contact us with the original part number, diagram item number, equipment model, or approximate year of manufacture—we'll help you identify the correct part to keep your machine working.