Universal Uniblast F113-019 Blast Gun Nozzle Washer – 5/8" ID

Keep your Universal / Uniblast suction blast gun properly assembled and operating efficiently with the F113-019 Blast Gun Nozzle Washer. This washer has a 5/8" inside diameter and is used at the nozzle connection on Universal Equipment Manufacturing / Uniblast Technologies abrasive blast guns.

The nozzle washer is a wear and sealing component and should be inspected whenever the blast nozzle is removed or replaced.

Part Information:

• Manufacturer: Universal Equipment Manufacturing Company / Uniblast Technologies
• Part Number: F113-019
• Product: Blast Gun Nozzle Washer
• Inside Diameter: 5/8"
• Application: Universal / Uniblast Suction-Feed Blast Guns

Includes:

• F113-019 Nozzle Washer – 5/8" ID
• #10

Features:

• Genuine Universal / Uniblast blast gun component
• 5/8" inside diameter
• Designed for the blast-gun nozzle connection
• Helps provide proper seating at the nozzle
• Replaceable wear component
• Allows individual blast-gun servicing without replacing the complete gun assembly
• Useful for rebuilding and maintaining older Universal / Uniblast equipment

What the Nozzle Washer Does

The nozzle washer sits at the blast-nozzle connection and helps provide a proper seating surface between components.

This is an important area of any abrasive blasting system. A damaged, worn, or missing washer can prevent the nozzle from seating correctly and may allow abrasive-laden air to escape where it shouldn't.

Once abrasive begins passing across an improperly sealed connection, it can rapidly erode surrounding components.

Common Reasons for Replacement:

• Washer is worn or distorted
• Cracking or deterioration
• Washer has become hard with age
• Nozzle does not seat properly
• Evidence of air or abrasive leakage around the nozzle
• Washer was damaged during nozzle removal
• Rebuilding an older Universal / Uniblast blast gun
• Installing a new blast nozzle

Inspect When Changing the Nozzle

The F113-019 nozzle washer is a good component to inspect every time the blast nozzle is removed.

Look for deformation, cuts, cracking, excessive wear, or evidence that abrasive has been leaking past the washer.

Replacing an inexpensive worn washer can help prevent damage to more costly blast-gun and nozzle components.

Finding Parts for Older Universal / Uniblast Equipment

Universal Equipment Manufacturing and Uniblast Technologies blasting equipment has been used in industrial applications for many years, and individual components for older blast guns can sometimes be difficult to identify.

That's why we include the original Universal / Uniblast part number and dimensions whenever possible.

For this component, the key identification information is:

Universal / Uniblast F113-019 – Blast Gun Nozzle Washer – 5/8" ID

Important:

This listing is for the Universal Equipment Manufacturing / Uniblast Technologies F113-019 Blast Gun Nozzle Washer with 5/8" inside diameter, including #10.

Blast nozzles, air jets, and other blast-gun components are sold separately unless specifically stated otherwise.

Always verify the F113-019 part number and 5/8" inside diameter before ordering.

Completely shut off and relieve compressed-air pressure before removing or servicing any blast gun, nozzle, air jet, hose, or related blasting component. Never operate a blast gun with a damaged, improperly seated, or insecure nozzle connection.

Need another part for your Universal or Uniblast blast gun? Contact us with the original part number or equipment model—we'll help you identify the correct part to keep your equipment working.